TR543C-353 Angled Aluminum-Wheel Truck Tubeless Valves

Designed specifically for aluminum truck and bus wheels, the TR543C-353 is a 45-degree angled metal clamp-in valve measuring 58.7 mm and sized for a 9.7 mm valve hole. The bend routes the valve stem away from the wheel face and dual-wheel gap, keeping it accessible for inflation without interfering with tightly spaced components common on aluminum wheel setups.

Aluminum wheels often place the valve hole in a position where a straight stem would sit awkwardly close to the rim edge or a neighboring dual wheel; the 45-degree bend on the TR543C-353 solves that by directing the valve outward at a usable angle. Its metal body is bolted through the rim with a nut and grommet for a secure, vibration-resistant mount suited to commercial-vehicle duty cycles.

Fleet maintenance shops working on trucks and buses fitted with aluminum wheels commonly keep this part in stock, since a straight valve is often not a workable substitute in this application. Packed ten per box.