TR9332-223 Dual-Angle Universal Screw-In Valves

The TR9332-223 departs from the single-bend design of the shorter parts in the series, using a dual-angle stem bent at 99 and 171 degrees over a total length of 140 mm, cross-referenced as V3.04.26. The double bend lets the valve stem navigate around more complex obstructions than a single-angle part can manage.

This configuration is useful on rims where a straightforward single bend still leaves the valve tip blocked by adjacent hardware, since the two-stage angle change routes the stem first away from the mounting point and then back toward an accessible position for inflation. It threads into the rim base in the same universal screw-in fashion as the rest of the range.

Because it solves a more specific clearance problem, the TR9332-223 is typically stocked as a specialty item alongside the standard single-bend valves, pulled out when technicians run into a rim geometry that the simpler parts can't clear. Ships ten to a pack.